EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Charge Controller is usually a extremely productive photo voltaic controller created for off-grid photo voltaic units. According to multiphase synchronous rectification know-how, it makes sure optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) applications.
Crucial Functions on the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Charge Controller technologies for outstanding solar Strength harvesting. Critical capabilities involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Screen with true-time knowledge monitoring.
Several Load Handle Modes which includes manual and timer.
Complete Electronic Protections towards overcharging, above-discharging, brief circuits, and reverse polarity.
Stage-by-Stage Manual to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Assure all parts are provided: Tracer AN unit, temperature sensor, communication cables, and user manual.
Validate the product variety and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a well-ventilated, dry locale near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Retain appropriate clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Usually abide by right basic safety protocols and ensure the system is run off ahead of connecting parts.
Phase 1: Join the battery terminals to your cost controller (good to positive, detrimental to adverse).
Stage 2: Join the solar panel array towards the PV enter terminals.
Phase 3: Join the load terminals if utilizing a direct load relationship.
Stage four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery first.
Utilize the Liquid crystal display display to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time checking using the MT50 distant meter.
Info is usually logged by means of the RS485 communication port working with computer software such as Solar Station Computer system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Problem one: No Energy Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage score.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings while in the menu.
Great things about the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification technological innovation makes sure:
Larger Performance: Click Here Decreased Electricity losses throughout conversion.
Enhanced Dependability: Secure efficiency underneath variable loads.
More time Battery Life: Regular and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up guide, consumers can assure maximum effectiveness and procedure longevity.